Brut d'Ober

Lamina de chapa de madera sin acabado sobre soporte estratificado. 28 especies de madera natural. En crudo, para acabar.

Referencias

Acajou
Acajou
Acajou d'Afrique
Acajou d'Afrique
Ako
Ako
Mukali
Mukali
Aliso
Aliso
Bambú
Bambú
Abedul Canadiense
Abedul Canadiense
Bubinga
Bubinga
Castaño
Castaño
Roble claro
Roble claro
Arce Canadiense
Arce Canadiense
Arce Moteado
Arce Moteado
Fresno Claro
Fresno Claro
Haya vaporizada
Haya vaporizada
Makoré moiré
Makoré moiré
Cerezo americano
Cerezo americano
Movingui moiré
Movingui moiré
Nogal Americano
Nogal Americano
Olmo Americano
Olmo Americano
Pino
Pino
Peral Salvaje
Peral Salvaje
Sapelli
Sapelli
Sicomoro
Sicomoro
Teck
Teck
Wengé
Wengé
Wengé Prefabricado
Wengé Prefabricado
Zebrano natural
Zebrano natural

Ficha producto


Entregada en crudo tiene la posibilidad de barnizarla, teñirla, encerarla, etc.

Características

ENSAMBLAJES ebanistería • de tipo macizo (según las referencias)
ASPECTO DE SUPERFICIE

chapa lijada en superficie

FORMATOS estándar:
305 x 127 cm • 252 x 127 cm
puertas:
215 x 95 cm • 215 x 127 cm
• 305 x 95 cm • 252 x 95 cm
GROSOR

0,8 mm

CURVADO curvado en frío paralelo a la veta hasta un radio de 10 cm o perpendicular a la veta hasta 12 cm

 

Descargue la ficha técnica

Aplicación

The panels are fabricated and glued in the same manner and on the same substrates as conventional laminates. In addition, we would like to add the following comments:

Handling

Handle carefully, the wood veneer may split, if handled incorrectly.

Substrates

When using 0.8 mm thick panels, it is imperative to bond a perfectly flat substrate.

Hot press bonding:Do not exceed 70°C.

Balancing

We strongly advise against using conventional type laminates for this purpose, the two materials being subject to differing expansion coefficients . For instance, doors may be backed both sides with Brut d’Ober sheets of same thickness and same surface finish. This is the same case when using thin substrates and/or in big dimensions.

Wall panelling, on the contrary, allows backing with Brut d’Ober one side only, provided the sheets is rigidly held in place by a securing system or reinforcement, while the back side is protected from humidity and covered with a vapour-resistant coat of paint, lacquer or varnish.

Cleaning off glue deposits

Proceed as for a solid wood surface.

Surface finish

Panels supplied pre-sanded, needing slight additional sanding by the fabricator for a professional result.

Technical assistance

Our technical department is at your disposal to help and advise in each particular case. The information offered in such cases, as well as that contained herein, is given to the user in good faith and to the best of our knowledge. However, the only criteria we take into account and guarantee is the intrinsic quality of our products.