Tectonique 5.5

La colección Tectonique 5.5 difunde una onda de choque en el ámbito de los techos colgantes. Ejemplo de un enfoque diseño integrado en el desarrollo del producto, la colección Tectonique 5.5, diseñada por 5.5 Designers, replantea totalmente el sistema de fijación de los techos colgantes, para ampliar el campo de soluciones estéticas y acústicas propuestas a los arquitectos y decoradores

Collections

Continent

Plaque
Plaque
Fissure
Fissure
Strate
Strate
Décrochement
Décrochement
Dérive
Dérive
Bloc
Bloc

Faille

Plateau
Plateau
Brèche
Brèche
Rupture
Rupture
Affaissement
Affaissement
Extension
Extension
Dislocation
Dislocation

Éruption

Volcan
Volcan
Dorsale
Dorsale
Rift
Rift
Magma
Magma
Cratère
Cratère
Séisme
Séisme

Glissement

Soulèvement
Soulèvement
Convergence
Convergence
Collision
Collision
Friction
Friction
Frottement
Frottement
Tremblement
Tremblement

System

Un  sistema de fijación , patentado e inédito

El sistema de fijación Tectonique 5.5, diseñado por los  5.5 Designers, permite instalar las losas de manera  inclinada o desalineada para generar volúmenes y ritmos que, hasta ahora, sólo las soluciones onerosas a medida permitían realizar. Tectónique 5.5  está compuesto de nuevos cuelgues, perfiles y ganchos desarrollados especialmente para montar todos los modelos del sistema.

1. Perfil de suspensión

Perforado con un paso de 100 mm para posicionar las varillas roscadas y el cuelgue de suspensión al sitio exacto, definido por el modelo de techo. Simplifica la instalación del sistema. El perfil de suspensión está fijado a la estructura portante del edificio con ganchos omega ajustables.
Ref. PA – 3030

2. Gancho de suspensión

Se fija al extremidad de la varilla roscada con una tuerca y una contratuerca. Destinado a recibir el tubo portante, está equipado de un clip para asegurar el ensamblaje. 
Réf. SUC – 75

3. Perfil distanciador

Destinado a garantizar la distancia entre los ganchos de suspensión y a reforzar el conjunto del sistema. Está fijado a presión en las varillas, por encima de los ganchos de suspensión.
Ref. ENC – 3000

4. Tubo-portante

Diseñado para soportar las losas, se apoya dentro del gancho de suspensión y se encaja sin fin gracias a una reducción en un extremo.
Ref. TC – 3000

5. Tope para tubo

El tope para tubo se encaja en los extremos de los tubos portantes para delimitar una isla y para impedir un eventual deslizamiento de los ganchos de losa. El tope está perforado en 2 puntos para poder pasar un cable de contraviento.
Ref. BUC – 45

6. Gancho de losa

LFijado a su plato por una rotación de ¼ vuelta, el gancho de losa está pensado para un montaje y desmontaje del techo  fácil y rápido. Las 3 alturas de ganchos se combinan en función de los modelos de techo.
Ref. CDC – 75 ( 75 mm) 
Ref. CDC – 175 ( 175 mm) 
Ref. CDC – 275 (275 mm)

7. Platina

Atornillada en la superficie trasera de la losa, está diseñada para recibir cada uno de los 3 ganchos. Su forma y su situación determinan la junta abierta de 6 mm entre las 2 losas.
Ref. PTC – 38X46

8. Losa de madera

La losa de madera es la parte visible del techo suspendido. Instalada sobre la estructura metálica, es particularmente ligera y plana. 12 formatos de losas forman 4 colecciones para un total de 24 modelos de techos.
Ref. PTE

Composition of the Tectonique 5.5 tile

With a new covering and new composition, the Tectonique 5.5 tile meets ambitious size and functional objectives. It benefits from the latest innovations of Oberflex’s research and development department in terms of aesthetics and industrial processes.

New generation wood veneer laminate

The Tectonique 5.5 tile is covered on its visible face with a real wood, new generation veneer laminate. Phenol-free, the veneer laminate face contributes to controlling the environmental impact of Tectonique 5.5. With an “A+” rating for VOC emissions, the tiles conform to air quality standards.

A brand new composition from Oberflex

The Tectonique 5.5 tile is composed of a particle board wood frame and a honeycomb cardboard body. Thanks to this new composition, it is light and easy to handle, while meeting the challenges of flatness, thickness and stability

Because its weight has been reduced, the thickness of the tile can be increased to improve the visibility of the sections and enhance the aesthetics of the designs.

Download the Tectonique 5.5 specification form

Descargue la declaración de rendimiento Tectonique 5.5 (losa)

Descargue la declaración de rendimiento Tectonique 5.5 (accesorios)

Montaje

Composed of a patented mounting system and lightened tiles, Tectonique 5.5 is easy to grasp. Installation requires no special tools and all the markers are adjusted and adapted for mounting and removal which is both simple and accurate. An installation guide and a predefined drawing for each model provides fast understanding of the system.

A unique mounting system

The tile hooks are supported by the main runners. All aligned in the same plane, they are set out at intervals defined according to the model concerned.

The angles and staggering between the tiles are obtained by 3 different hooks of variable heights ( 75 mm, 175 mm and 275 mm). The precise locations of the hooks on the back of the tiles are pre-defined and contribute to the play of overlays and angles.

Easier installation

The first step is to define the position of the ceiling according to an axis or one side of the room. Once the fastening profiles are attached at regular intervals (max. 1200 mm) on the primary ceiling, simply assemble the hangers, clip the spacers and insert the main runners.

Once the structure is in place, the wooden tiles can be placed into position on the main runners.

Cualidades acústicas

A new approach regarding acoustics of your spaces

Control of a building’s sound quality is obtained by the balance between absorption, diffusion and reflection of the sound. Tectonique 5.5 ceilings, due to their shapes and relief forms, directly influence these three acoustic characteristics. The choice of a model will therefore be made according to its relief and openings, taking into consideration the layout of the space and the acoustic effect being sought.

Absorption

Sound absorption is the ability of a wall to partially absorb a sound wave and only to return a part of the energy received to the point of departure. This property thus helps reducing reverberation in a space and increases the acoustic comfort and the intelligibility of speech.

The sound absorption of Tectonique 5.5 ceilings, is created by the position of the tiles and the spaces between them and by the characteristics of the material.

Reflection

Reflection is a physical phenomenon by which a surface returns a portion of the sound waves. It is the type of surface and the nature of the material which affect the reflection of a sound wave.

The surface of Tectonique 5.5 tiles contributes to controlling sound reverberation. A part of the wave is reflected whereas the other part enters the material.

Diffusion

When a sound wave encounters a flat obstacle, the angle of reflection is equal to the angle of incidence, same as a mirror. If the surface has relief forms and shapes, the obstacle becomes a point of dissemination and the sound wave is sent back in all directions.

The relief forms and the changes of planes of Tectonique 5.5 ceilings create this dissemination and limit the areas of focus of the sound and echoes. This more diffuse and homogeneous acoustic enriches the sound balance of the space.


The evaluation of these three acoustic characteristics is provided in the data sheets for each model. These give guidance in ? aimed at comparing the potential of acoustic correction of one model in relation to another.

Un sistema eco-concebido

Tectonique 5.5 is an eco-designed system, imagined and developed to reduce its environmental impact from its design and throughout its life cycle. Its composition anticipates the end-of-life recycling of the materials.

 

Montataire (60) - Agence d'Architecture : Lacau & Associés - Maître d'Ouvrage : Ville de Montataire (Oise)

Salle polyvalente

Québec - Atelier 21

Centre des gagnants du Loto